Lifting, pushing, clamping – those are just some of the tasks that a good-quality jack can handle. Despite the relatively modest weight (25-30 pounds), it usually has a rated capacity of 4-5K pounds, which is quite impressive. For off-roading and just hitting the road, it’s highly recommended to keep a jack in the trunk just in case. Right now, the market is overwhelmed with all kinds of offers.
And, it can be quite hard to sort through them all until you get your hands on a decent product. But don’t you worry even for a second. In this post, I’ll help you find the best jack for Jeep Wrangler that’s reasonably-priced and still performs flawlessly. My list includes jacks by Hi-Lift, Smittybilt, and ARB. They are all durable, lightweight, made of high-quality materials, and fit a wide range of different Wrangler editions. Let’s check them out right now!
Best Jack for Jeep Wrangler (Updated September, 2020)
|Product||Product Information||View on Amazon|
That’s it for my list of the best jacks for a Jeep vehicle. If you’re one of those people that don’t like to do any research on their own, just pick a jack from out table that you like and put it in the trunk. But if you prefer to know in advance all the “ins and outs”, this Buyer’s Guide will help you to better understand what you’re dealing with. What should you pay attention to first when considering a new jack? Which aspects are the most important ones? Read on to find out!
Jacks are specifically made to withstand extreme pressure, and the material quality plays a key role here. Solid cast steel is what you should look for. As a general rule, cast parts are stronger and more durable than welded parts. Powder-coated finish, along with zinc-plated hardware will make the jack even more reliable and long-lasting.
Plus, I recommend going for the two-piece handle-socket design, as it’s proven to be effective in real-world situations. Steel is an affordable material and it allows the manufacturers to drop the price. In comparison, aluminum is more expensive, but it’s also lightweight. Hi-lift jacks are mostly made of steel, while floor jacks are made of aluminum.
Min and Max Lift Height
The average lift height range is 6-48 inches. Some jacks go as low as 4.5″ and as high as 60″. If you’re driving an extremely big vehicle, you’ll need the jack to go as high as possible. However, keep in mind that as rigid and sturdy the jack could be, the higher you go, the less stable it will become.
Capacity and Weight
This is usually rated in tons: 2 tons is 4.6K pounds, while 3 tons is 7K pounds. So, always consider the weight of your Jeep. Is it a heavy full-size SUV, or a smaller, more compact crossover? For example, Jeep Wrangler’s curb weight never goes above 2 tons, meaning you’ll be fine even if you pick a less capable jack.
As for the weight of the jack, it needs to be perfectly balanced. To hold something as heavy as an off-road monster, it has to be quite heavy. On the other hand, a lightweight device is much easier to carry around. A quick note: none of the three jacks from my comparison table go above the 30 pounds weight limit, which is the golden middle.
To use a winch with the jack, you’ll need a connector clamp. It will be even better if the clamp is adjustable, allowing you to “fine-tune” it to your winch. When dealing with a jack, safety should always come first. Some manufacturers like Hi-Lift include a shear bolt that doesn’t allow you to use it on loads that exceed its capacity.
Fans of off-roading know very well that getting stuck in the middle of nowhere is often a big part of the journey. This is because we’re constantly pushing forward trying to go through mud, rock, sand, snow, and everything else in between. Now, while sleeping in a bag under the stars can be fun, you’ll still need something to, well, get the Jeep unstuck. That’s where a jack comes in: it can get you out of even the direst situations.
Therefore, make sure to always carry one in your Jeep so that you’ll be prepared to face the music. If you’re not the wealthiest person on the planet, you might want to check out Hi-Lift’s jack. It’s quite affordable, user-friendly, and has a top-quality finish. With Smittybilt, you’ll get extended durability and a rubber handle. ARB, in turn, is lightweight, easy to carry around, and low-budget. So, which one will you pick? Share in the comments!